Posts Tagged education

Result of Andhra Pradesh TET 2011 Announced

Today, Andhra Pradesh Teacher Eligibility Test (APTET) released on the official website for July 2011 examination. The exam was conducted on 31st July, 2011.

APTET result 2011 release date was notified on August 30, 2011. But it re-scheduled again on 4th September 2011 due to some administrative reasons.

Andhra Pradesh Teacher Eligibility Test recruitment was notified on 19th May, 2011. Candidates had to submit payment of fee from 20th May to 16th June, 2011. Submission of online application form was available from 20th May to 17th June, 2011.

Total 296826 candidates appeared for paper I from 324434 (91.5%). Total 161496 applications were received for Paper II (M & Sc.) but only 152440 (94.4%) candidates appeared. Total 173307 (95.4%) candidates appeared for Paper II (Social Studies) from 173307 applicants.

Total 622573 candidates appeared in Andhra Pradesh TET 2011 exam on 1518 centers. AP TET initial key was released on 5th August and final key on 12th August, 2011.

Total 140171 (47%) in Paper I, 81799 (47%) in Paper II Social Studies and 89638 (59%) candidates in Paper II Mathematics and Science have qualified in APTET exam 2011.

Andhra Pradesh TET Results 2011 is available at: http://aptet.cgg.gov.in/aptetResults2011.aptet by entering hall ticket number.

AP TET is a new process of recruiting teachers in Andhra Pradesh State for class 1 to 8. Candidates are asked to check APTET results 2011 online.

Source: Andhra Pradesh TET Result 2011

Leave a Comment

MBA Questions Papers of Financial Management for 2nd Semester

We are going to publish some most probable questions of SMU MBA. These are most probable questions of Financial Management for 2nd semesters of MBA. All these questions will be on the pattern of SMU which is asked in examinations.

1. ————- is broadly concerned with the acquisition and use of
Funds by a business firm

A) Financial management.
B) Marketing management.
C) Human resource management.
D) Project management.

2. “An understanding of what finance does is the foundation of
Financial knowledge”

A) Henry Ford
B) G.L.Jones
C) Van Homes
D) None of these

3. Which of the following is not one of the “A” of financial management?

A) Anticipating financial needs
B) Arranging funds
C) Allocating funds
D) Acquiring financial resources

4. Which of the following is the importance of financial management?

A) Smooth running
B) Earning capacity
C) Assets expansion
D) Project generation

5. Financial management is considered as a yardstick to measure the — Of the firm.

A) Smoothness
B) Performance
C) Maximization
D) Efficiency

6. Traditional approach is evolved during —–.

A) 1920-30
B) 1925-30
C) 1930-35
D) 1935-40

7. The main task of finance manager under traditional approach is

A) Allocation of funds
B) Procurement of funds
C) Acquisition of funds
D) Anticipation of funds

8. Which of the following is not the content of the modern approach?

A) How should the funds required be financed?
B) What specific assets should an enterprise acquire?
C) How does the cost vary with the mixture of financing methods used?
D) What is the total volume of funds an enterprise should commit?

9. According to modern approach which of the following is not the decision area of finance manager?

A) Investment decision
B) Dividend policy decision
C) Funds requirement decision
D) Forecasting decision

10. Which of the following is the factors taken into consideration while ascertaining profitability?

A) Measuring cost of capital
B) Raising funds
C) Management of long term funds
D) Management of short term funds

Comments (1)

Uses of “A”, “An” and “The” in English Grammar

Uses of “A”, “An” and “The” in English grammar are known as “Article”. In English grammar it has great importance because it is the chapter of great uses.

“A” and “An” are known as indefinite article. These are used for those which are not certain. If a person waiting outside from the door and he is not known then we can use “A” for that person.

Normally, “A” is used with consonant and “An” is used with vowel but the uses of these in actual sense are different. To use “An” there should be a sound of vowel in Hindi and similarly there should be a sound of consonant in Hindi to use “A”.

“A” and “An” both are used for uncertain and for those which are in singular number. For these uses these are known as indefinite article.

In the article chapter “The” has greater importance and it is known as definite article. It is used for those which are certain. If a person who is known by us will take “The”. “The” formerly, is used for universal things and for well known things.

Sun, Moon, Earth, Sky, God etc. always take the before it because these are well known famous and universal things. So, it should be clear in the uses of “The” that all things which are most well known will take “The” before it. For example – The Ganga, The Himalayas etc are taken” The” before all.

In the English grammar it is clear that article uses are not hard but the situation understanding for the use of article is very hard. To learn English very effectively you should know the uses of article also in the recent education and study.

Leave a Comment

Management Accounting Review for SMU MBA

I have to share an accounting concept for management. This is the review for SMU MBA students by financial management MBA book. It is for those students who are busy in preparing their MBA by SMU. Below is review by management accounting blog:

“Management accounting is not only for the record keeping but also it has broader aspects. The managers use the financial statements as resources to make decision in the field of accounting. About the management accounting we can take a look from MBA book of SMU, “Management accounting is the process of identifying, measuring, accumulating, analyzing, preparing, interpreting and communicating information that helps managers to fulfill organizational objectives.”

Here with the definition of management accounting we can say it is for the fulfill of organization objectives by the managers to use all the financial statements and resources.

Objectives of Management Accounting:

Scope of management accounting

Need for financial statements analysis and inter-firm comparisons

Relevance of cost analysis – overhead analysis, job cost analysis and process cost analysis

Relevance of marginal cost and C.V.P. analysis for short-run decision-making

We should know that all the management process single and most upper goal is decision making. So, decision-making is known as the nucleus of management process. Here we will look a chart to understand of decision-making process:

decision-making process

Meaning and Scope of Management Accounting:

About the meaning of management accounting Charles T. Horgren writes, “Management accounting is the process of identifying, measuring, accumulating, analyzing, preparing, interpreting and communicating information that helps managers to fulfill organizations objectives.”

As I have already mentioned that management accounting is not only the process of keeping records. Records keeping is the process of data accumulation however management accounting is the decision making process. So, the management accounting scope has broader then financial statements and record keeping.

About the evaluation of management accounting the history says that it comes with the industrial revolution from the 18th century. Management accounting is the results of capitalist system.

Management accounting has been divided into four parts – book keeping, financial accounting, accounting and cost accounting and social responsibility accounting.

Like this management accounting has one more main part that is MIS (Management Information Systems). MIS for management accounting is most important process because it collects data and gives the right way to analysis that data to take good decisions by managers.

At last we can give some facts which are necessary in functions of management accounting:

Formulation of a business plan

Implementation of the plan

Designed to achieve the goals of the plan

Formulation of business plans

These are the main function of management accounting an organization. However, we have already discussed on the management accounting chapter. Now, I think I will cover some more facts in the next chapter of financial management accounting chapter.”

Source Via :Introduction to Management Accounting

Leave a Comment

SMU MBA Assignment Question-2 from MB 0028 Book

I found a blog on the SMU MBA Assignment. You can find from the blog all types of MBA assignment of Sikkim Manipal University. I am going to publish one of the assignment questions from the MBA assignment blog.

Production and operations Management

Question 2. Sate the important consideration for locating an automobile plant? Collect information on layout planning of an automobile plant from various services and furnish the same.

Answer: To locate an automobile company or plant many thing should be consider. For an automobile plant automated flaw lines, automated assembly lines, flexible manufacturing systems, global transition rapid prototyping. Building manufacturing flexibility things are necessity.

About the automated flow lines we can say it is a machine which is linked by a transfer system which moves the parts by using handling machines which are also automated, we have an automated flow line.

Human intervention ma is needed to verify that the operations ate taking place according to standards. When these cab be achieved with the help of automation and the processes are conducted with self regulation, we will have automated flow lines established.

In fixed automation or hard automation, where one component is manufactured using services operations and machines it is possible to achieve this condition. We assume that product life cycles are sufficiently stable to interest heavily on the automate flow lines to achieve reduces cast per unit.

Product layouts ate designed so that the assembly tasks are performed in the sequence they are designed at each station continuously. The finished item came out at the end of the line.

In automated assembly lines the moving pallets move the materials from station to station and moving arms pick up parts, place them at specified place and system them by perusing, riveting, & crewing or even welding. Sensors will keep track of there activities and move the assembles to the next stage.

The machines are arranged in a sequence to perform operations according to the technical requirements.

The tools are loaded, movements are effected, speeds controlled automatically without the need for worker’s involvement.

The flexibility leads to better utilization of the equipments. It reduces the numbers of systems and rids in reduction of investment as well as a space needed to install them. One of the major cancers of modern manufacturing systems is to be able to respond to market
Demands which have uncertainties.

Prototyping is a process by which a new product is developed in small number so as to determine the suitability of the materials, study the various methods of manufactured, type of machinery required and develop techniques to over come problems that my be encountered when full scale manufacture is undertaken.

Prototypes do meet the specification of the component that enters a product and performance can be measured on these.

It helps in con be reforming the design and any shortcomings can be rectified at low cost.

Flexibility has three dimensions in the manufacturing field. They are variety, volume and time. There demands will have to be satisfied. In that sense they become constraints which restrict the maximization of productivity. Every business will have to meet the market demands of its various products in variety volumes of different time.

Flexibility is also needed to be able to develop new products or make improvements in the products fast enough to cater to shifting marker needs.

Manufacturing systems have flexibility built into them to enable organization meet global demand. You have understood how the latest trends in manufacturing when implemented help firms to stay a head in business.

Note: all the answer has been taken by SMU book of MB 0028 for this assignment.”

Source Via: Question-2 – Assignment-1 of SMU – MBA Book of MB 0028

Comments (1)

Computer Based Online Training

Computer based training as known CBT also in short. You can say it CBT planet because it is a course in computer which is provided by cbtplanet.com. If you want to go through online course you should go through certification course in computer field.

What provide CBT plant? It is the real question before going to participate in any organization, what the center actually provide related to the course. You can know about this because CBT planet announcing itself that it is providing desktop office users, IT certification, Technical IT, Networking and programming course.

Computer based training nothing but computer training in various courses. Whether it is certification course or it technical or programming course. If we want to learn or intended to get training in computer certification course, surely we need a online or off-line training course program. In this situation we go through online certification or off-line certification course.

Here with CBT planet we can get all the certification with online training. The institute provides also CD computer based training. You can get CD to learn programming or technical aspect on your computer by the CBT planet CD.

Lastly, CBT planet is the certification course in computer to learn effective computer by online or CD which is provide by the computer based training.

Leave a Comment